Decide how wide you want your strap to be and where on the shoe you prefer it. If you would like it close to your instep, which is lower on the shoe, it will be shorter. brands outlet If you would like it higher, close to your ankle, the leather strap will need to be longer.

Cut your leather strap according to the style you'd like. If the leather is raw, and you want finished edges, cut it approximately two times the width you'd like. Cut it length-wise based on a rough measurement on the shoe, leaving plenty of extra material for attaching the strap.

Fold each edge on the long side of the leather over, creating a hem, if the leather strap has raw edges. Thread the needle by pushing the end of your thread through the eye of the needle. Sew an even baste stitch, which goes in and out from front to back, across the top and bottom of the strap. Hem and sew down the outside edge of the strap if michael kors you'd like that to be hemmed as well. If the strap is thin, it's customary to cut it off at an angle, leaving the edge raw.

Sew the inside end of the strap to the inside instep of your sew using the same baste stitch. Ensure the angle you sew the strap in will be parallel to the ground and perfectly perpendicular across your foot.

Insert your foot to measure where the strap hits the outside of the shoe on the other side of where the strap is attached. If you'd like a slip-on Mary Jane, cut a small 1- to 2-inch piece of elastic, and sew it in as an attachment point as you did with the other side of the strap. Sew the elastic first to the inside of the shoe, directly across from the attachment point on the other side of the shoe. Then, attaching the same side of the elastic to the strap, lay the strap across the top of the elastic, and sew with your baste stitch. brands shop The strap will hang slightly over the edge of the shoe, and the elastic will not be visible.

Perhaps the largest distinction between men's and women's pants is in the way they are sized. Men's pants tend to be visibly wider and longer than those made for the opposite sex, nike free and are marked with two numbers to label size --- one indicating the waist size and one signifying the inseam, or leg length --- in inches. For example, a pair of male pants marked with the numbers "36-34" is designed for a man with a 36-inch waist and legs that are roughly 34 inches long from the inseam.

Women's Sizing

Pants sized for women are marked with just one even number starting at zero. There is no industry-wide standard for sizing women's pants, so a size 10 purchased from one designer could vary substantially from the same size of another manufacturer. nike womens trainers Furthermore, rather than measuring the inseam to determine the pants' length, there are just four common choices --- petite, short, regular and long.

The Rise

The rise of a pair of pants determines how high up on the waist they sit. Although all types of rises are available both to men and women, women can often wear a low-rise pant and find it very flattering, whereas most men would shy away from wearing pants that sit so low to the waist. Medium-rise pants rest just below the navel --- a cut that flatters almost any body type, male or female.

Color and Pattern

While a huge variety of colors are available to both sexes, women are far more likely to choose brighter colored, patterned or decorated pants. Men, on the other hand, nike air max 2015 tend either to stick to traditional men's patterns such as hounds tooth, pinstripe or plaid, or to solid, darker colored pants.